-
The degree of pilling of woven fabrics was determined by the Martindale method
Jan 11 , 2022
Pilling is the formation of tangled bundles or balls of fibers that are anchored to the surface of a fabric by one or more fibers. The resistance to the formation of pills on the surface of a textile fabric is known as pilling resistance. Pills of yarns or fabrics are due to fiber mobility in the yarn. Yarn size stability is very important, because if our yarn size is stable, the fiber mobility in...
Read More
-
What’s the Safety Shoes Penetration Resistant Inserts Flexing Tester used for
Nov 10 , 2021
Safety shoes Inserts Flexing Tester is used to test the folding resistance of the safety insole board. Do you want to know more about the Safety Shoes Penetration Resistant Inserts Flexing Tester? Test position: 2 Max bending vertica height: 33mm Distance of guide rode Fixture: 70mm Bending frequency: 16±1 times/s Power supply: AC220V, 50/60HZ More about Inserts Flexing Resistance Tester ...
Read More
-
Introduction to the Manual Laboratory Padder
Jul 03 , 2021
Instructions for use of the Manual Laboratory Padder ① Shake and rotate the pressure hand wheel according to the sample to roughly adjust the distance and pressure between the two rolls. ②Ensure that there is no foreign matter in the upper and lower rolls. ③Put the sample between the two rollers and start squeezing water. ■ Be careful of your fingers during operation! ■ After get off work, separat...
Read More
-
Sample Preparation of Scorch & Sublimation Tester
Jun 26 , 2021
Prepare the sample of Scorch & Sublimation Tester If the sample of Scorch & Sublimation Tester is textile, cut a undamaged and no defect sample of size 12cm×4cm If the sample of Scorch And Sublimation Tester is yarn, weave them to a webgwebbing, and cut a sample of size 13cmx4cm, or twine the yarn on a 12cmx4cm thin inert material and get the test area. 【Note】 If you the test sample had be...
Read More
-
What’s the Hydrostatic Head Pressure Tester used for
Mar 15 , 2021
Hydrostatic Head Pressure Tester is used to measure the impermeability of various fabrics that have undergone water-repellent treatment, such as canvas, tarpaulin, tent cloth, tarpaulin, rainproof clothing cloth and geotextile materials. Do you want to know more about the Hydrostatic Head Pressure Tester? Included Standard Accessories 100cm² griper 1set Calibration plate 1set Rubber ring 1set Powe...
Read More
-
Introduction of Snap Button Pull Tester
Mar 05 , 2021
The assessment of snap attachment strength is an important criterion especially in the design and manufacturer of garments for infants’ and childrenwear. The measurement of an uniform force applied to the snap attachment shall be recorded by means of a force-measuring device. (in this case an Imada Push/Pull Scale is utilized). Once the appropriate force is registered on the Imada Scale, a stopclo...
Read More
-
What’s the Color Matching Cabinets used for?
Feb 15 , 2021
Color Matching Cabinets are widely used in the field of color management in various industries such as textiles, plastics, paints, inks, printing and dyeing, printing, pigments, packaging, ceramics, leather, cosmetics, etc., to accurately check the color deviation of goods and improve product quality and market competitiveness. Especially in cloudy and dark hours, the use of standard light sources...
Read More
-
Precautions Of Electronic Tearing Tester
Jan 12 , 2021
1. The weight must be installed in place before use, and the handwheel must be tightened and tightened. 2. When the Farbic Tearing Tester is working, hands, heads, etc. should not be near the handle turning area; it is strictly forbidden to make the handle touch any obstacle. 3. When the Farbic Tearing Tester has not been used for a long time, it should be oscillated several times...
Read More
-
Operating specifications of Stroller Dynamic Durability Tester
Nov 30 , 2020
Stroller Dynamic Durability Tester is suitable for simulating the durability of baby strollers in actual road conditions. 1. Prepare test piece Sample preparation: The baby stroller sample used for testing should be a finished baby stroller assembled according to the technical requirements of the factory The assembled baby stroller used for testing should be a stroller that meets the factory quali...
Read More
