Martindale Abrasion Tester is suitable for the test of the degree of abrasion and pilling of fabrics. It is also suitable for fabric abrasion resistance test. Martindale Abrasion Tester is widely used in textile testing.
Tensile Strength Tester is used in various materials such as rubber and plastics, footwear, leather, clothing, textiles, insulators, terminals, etc., to test the development of materials such as stretching, tearing, peeling, and bending.
Rubbing fastnes Tester Crockmeter uses dry or wet white cotton cloth to tie the surface of the friction hammer of the machine. According to the specified method, with a certain load and number of times, the sample and the white cotton cloth for friction are rubbed against each other, and the degree of staining of the white cotton cloth for friction is equal to Staining rating gray scale for comparison, and assessing the color fastness to rubbing
100CM² Sample Cutter (GSM Cutter) is designed to rapidly and accurately cut circular specimens of a particular fixed area or diameter, from nearly any type of material, including woven, non-woven and knitted textiles, carpet, film, foam. Paper and board.
Lab Color Matching Light Box are widely used in the field of color management in various industries such as textiles, plastics, paints, inks, printing and dyeing, printing, pigments, packaging, ceramics, leather, cosmetics, etc., to accurately check the color deviation of goods and improve product quality and market competitiveness.
The Perspiration Tester is supplied as a stainless steel frame capable of holding up to 20 samples. The samples are generally 10cm x 4cm and are held between acrylic separator plates. The unit is supplied with a weight and a supplementary plate allowing both ISO and AATCC test methods to be performed.
Rubbing Fastness Tester mainly uses a sample holder to fix the sample and sandpaper on one side of the base. Shake the handle to make the friction head with white cotton cloth reciprocate on the sample with a specified stroke. After rubbing ten times, observe and compare and evaluate with a gray card. The degree of sticky color on the white cotton cloth judges the dyeing of the fabric sample or the stability of the surface coating, and provides reference data for the evaluation and selection of materials.
AC05B AATCC Crockmeter is suitable for testing the color fastness to rubbing and staining of various textiles (made of various fibers, dyed or printed yarns, fabrics and textile products, including textile carpets and other velvet fabrics).
AATCC Electronic Crockmeter mainly consists of the control system and friction system, fix sample by sample holder on the end of the base sticking a sandpaper, put abrasion head with a white cotton cloth on the sample. After rubbing the fixed number of times, observe sample and evaluate the coloring degree of white cotton cloth comparing with gray card, make judgments to the stain of the fabric sample or the stability of surface coating provide reference data for the assessment and selection of materials.
DIN Abrasion Tester (vacuum cleaner mode) is applied to determine the abrasion resistance of polyester sole, adult shoe sole and polymer sheet material.
