Salt Spray Test Chamber is a surface treatment of various materials, including hardware plating, electronic products, electronic components, auto parts, motorcycles, hardware sanitary ware, screws, springs, magnetic materials, organic and inorganic membranes, anode treatment, and prevention Quality detection of the rust and other industries, test the corrosion resistance of its products.
Brand:
AVENOItem NO.:
AE02Payment:
T/T, L/CProduct Origin:
ChinaShipping Port:
Xiamen portLead Time：
3-7daysApplication
Salt Spray Test Chamber is a surface treatment of various materials, including hardware plating, electronic products, electronic components, auto parts, motorcycles, hardware sanitary ware, screws, springs, magnetic materials, organic and inorganic membranes, anode treatment, and prevention Quality detection of the rust and other industries, test the corrosion resistance of its products.
Standards
CNS3627, 3885, 4159, 7669, 8886, JIS D-0201, H-8502, H-8610, K-5400, Z-2371, ISO 3768, 3769, 3770, ASTM B-117, B-268, GB-T2423, GJB 150.
Key Specification
|
Model |
Salt Spray Test Chamber |
||
|
Test chamber capacity (L) |
108L |
270L |
480L |
|
Test chamber dimension L×W×D(cm) |
60×45×40 |
90×60×50 |
120×80×50 |
|
Outside dimension L×W×D(cm) |
110×66×105 |
138×88×110 |
190×130×140 |
|
Brine tank |
15L |
25L |
25L |
|
Temperature of test chamber |
NSS.ACSS 35℃±1℃/CASS 50℃±1℃ |
||
|
Temperature of pressure barrel |
NSS ACSS 47℃±1℃/ CASS 63℃±1℃ |
||
|
Compressed Air Pressure |
1.00±0.01kgf/cm2 |
||
|
Spray quantity |
1.0-2.0ml/80cm2.h |
||
|
Test chamber relative humidity |
Above 85% |
||
|
PH |
6.5~7.2, 3.0~3.2 |
||
|
Spray method |
Continuous and intermittent method |
||
|
Temperature range |
1.Test chamber: 35℃, pressure barrel 50℃ can be set 2.Test chamber: 47℃, pressure barrel 63℃ can be set Temperature accuracy: ±1℃ |
||
Standard Accessories
|
Model |
Salt Spray Test Chamber |
|
Counting cup |
1pc |
|
English manual |
1pc |
Martindale Abrasion Tester is suitable for the test of the degree of abrasion and pilling of fabrics. It is also suitable for fabric abrasion resistance test. Martindale Abrasion Tester is widely used in textile testing.
Hydrostatic Head Tester is used to measure the impermeability of various fabrics that have undergone water-repellent treatment
Zipper Fatigue Tester is suitable for testing zipper under the action of horizontal and vertical tension can bear the prescribed number of reciprocating drive operation or not.
ICI Pilling and Snagging Tester is used to determine the surface fuzzes and pilling properties of both woven and knitted materials.
Spray Rating Tester is used to determine the surface wetting resistance of fabrics.
Bursting Strength Tester is suitable for various textiles, non-woven fabrics, leather and other materials, when the force is applied in all directions of warp and weft at the same time (elastic diaphragm method), the performance measurement of expansion force and degree of expansion.
0.01g Balance with durable stainless steel scale, weighing, peeling, counting, unit conversion.
Button Snap Pull Tester is used to test whether the buttons sewn on the clothes can withstand the strength required by the standard.
Tel : 15280858852
Whatsapp : 15280858852
Email : market@avenotester.com
Skype : sales@avenotester.com
Address : 1# Zhongjunshangcheng, Nanhuan Road, Licheng Region, Quanzhou of Fujian China
