The zipper fatigue tester is used to test the reciprocating motion of various zippers under the specified compliance and specified number of times. The zipper tester is suitable for CNS -1083, BS 3084, QB/T2171, 2172, 2173, SATRA TM50, DIN EN16732, etc.
Brand:
AVENOItem NO.:
AG08BPayment:
T/T, L/CProduct Origin:
ChinaShipping Port:
Xiamen portLead Time：
3-7 daysApplication
The zipper fatigue tester is used to test the reciprocating motion of various zippers under the specified compliance and specified number of times. The zipper tester is suitable for CNS -1083, BS 3084, QB/T2171, 2172, 2173, SATRA TM50, DIN EN16732, etc.
The zipper fatigue tester uses a touch screen for display, with a simple and easy-to-understand interface, easy to operate and sensitive to touch. The appearance of the fuselage is simple and elegant.
Standards
CNS -1083, BS 3084, QB/T2171, 2172, 2173. SATRA TM50, DIN EN16732
Dimension & Weight
|
Model |
Zipper Fatigue Tester |
|
Dimensions |
45 cm * 35 cm * 80cm |
|
Weight |
60 kg |
Key Specification
|
Model |
Zipper Fatigue Tester |
|
Control mode |
Touch screen control |
|
Reciprocating speed |
30cycles/min |
|
Gripping device width |
25mm |
|
Sample angle during test |
Open 60°, Close 30° |
|
Reciprocating stroke |
82.5mm |
|
Reciprocating speed |
30 cycles/min |
|
Reciprocating travel |
75mm |
|
Power Supply |
AC220V, 50/60HZ |
Standard Accessories
|
Model |
Zipper Fatigue Tester |
|
Load weight |
9N*2pcs,8N*2pcs,5N,4N*2pcs,3*2pcs, 6N*4pcs |
|
Inner hexagon wrench |
1pc |
|
Power line |
1pc |
Martindale Abrasion Tester is suitable for the test of the degree of abrasion and pilling of fabrics. It is also suitable for fabric abrasion resistance test. Martindale Abrasion Tester is widely used in textile testing.
Hydrostatic Head Tester is used to measure the impermeability of various fabrics that have undergone water-repellent treatment.
Zipper Fatigue Tester is suitable for testing zipper under the action of horizontal and vertical tension can bear the prescribed number of reciprocating drive operation or not.
ICI Pilling and Snagging Tester is used to determine the surface fuzzes and pilling properties of both woven and knitted materials.
Spray Rating Tester is used to determine the surface wetting resistance of fabrics.
Bursting Strength Tester is suitable for various textiles, non-woven fabrics, leather and other materials, when the force is applied in all directions of warp and weft at the same time (elastic diaphragm method), the performance measurement of expansion force and degree of expansion.
0.01g Balance with durable stainless steel scale, weighing, peeling, counting, unit conversion.
Button Snap Pull Tester is used to test whether the buttons sewn on the clothes can withstand the strength required by the standard.
Tel : 15280858852
Whatsapp : 15280858852
Email : market@avenotester.com
Address : 1# Zhongjunshangcheng, Nanhuan Road, Licheng Region, Quanzhou of Fujian China
