Electronic peel tester is used to test the peel strength performance of fabrics, such as peel strength test of various bonding between adhesive interlining, adhesive laminated fabric, hot melt adhesive interlining and clothing fabric.
Brand:
AVENOItem NO.:
AG40Payment:
T/T, L/CProduct Origin:
ChinaShipping Port:
Xiamen portLead Time：
3-7daysApplication
Electronic peel tester is used to test the peel strength performance of fabrics, such as peel strength test of various bonding between adhesive interlining, adhesive laminated fabric, hot melt adhesive interlining and clothing fabric.
Standards
FZ/T 01085, FZ/T 80007.1, AATCC 136, FZ/T 01010, FZ/T60011
Dimensions & Weight
|
Model |
Electronic Peeling Tester AG40 |
|
Dimension |
52 x40 x160cm |
|
Weight |
60Kg |
Key Specification
|
Model |
Electronic Peeling Tester AG40 |
|||
|
Force measurement range |
Model |
AG40 -5 |
AG40 -10 |
AG40 -50 |
|
Full scale |
50N |
100N |
500N |
|
|
Measurement range |
1% to 100% of full scale |
|||
|
Working mode |
CRE principle, microcomputer control, LCD display, can be connected to computer |
|||
|
Sampling frequency |
1000 times / sec |
|||
|
Test accuracy |
≤0.2%F·S |
|||
|
Stretching speed |
50 ~ 1000mm / min |
|||
|
Max.elongation |
800mm |
|||
|
Clamp width |
60mm |
|||
|
Elongation resolution |
0.01mm |
|||
|
Power supply |
AC220V 50/60HZ |
|||
Martindale Abrasion Tester is suitable for the test of the degree of abrasion and pilling of fabrics. It is also suitable for fabric abrasion resistance test. Martindale Abrasion Tester is widely used in textile testing.
Hydrostatic Head Tester is used to measure the impermeability of various fabrics that have undergone water-repellent treatment.
Zipper Fatigue Tester is suitable for testing zipper under the action of horizontal and vertical tension can bear the prescribed number of reciprocating drive operation or not.
ICI Pilling and Snagging Tester is used to determine the surface fuzzes and pilling properties of both woven and knitted materials.
Spray Rating Tester is used to determine the surface wetting resistance of fabrics.
Bursting Strength Tester is suitable for various textiles, non-woven fabrics, leather and other materials, when the force is applied in all directions of warp and weft at the same time (elastic diaphragm method), the performance measurement of expansion force and degree of expansion.
0.01g Balance with durable stainless steel scale, weighing, peeling, counting, unit conversion.
Button Snap Pull Tester is used to test whether the buttons sewn on the clothes can withstand the strength required by the standard.
Tel : 15280858852
Whatsapp : 15280858852
Email : market@avenotester.com
Address : 1# Zhongjunshangcheng, Nanhuan Road, Licheng Region, Quanzhou of Fujian China
