Dynamic Fatigue Tester For Sewn Seam is suitable for testing the dynamic fatigue resistance of the stitching position of sofa fabrics.
Brand:
AVENOItem NO.:
AG50Payment:
T/T, L/CProduct Origin:
ChinaShipping Port:
Xiamen portLead Time：
3-7daysApplication
Dynamic Fatigue Tester For Sewn Seam is suitable for testing the dynamic fatigue resistance of the stitching position of sofa fabrics.
Standards
ASTM D4033
Principle
Fix a sample with a seam position on a sample seat containing an elastic foam plastic pad, fix both sides, and use a wheel with a fixed weight that can rotate freely on the rubber surface to continuously impact the sample surface from a certain height until the set number of times to check whether the seam position of the sample is damaged.
Dimension & Weight
|
Model |
AG50 Dynamic Fatigue Tester For Sewn Seam |
|
Dimension |
156x80x100cm |
|
Weight |
250kg |
Key Specification
|
Model |
AG50 Dynamic Fatigue Tester For Sewn Seam |
|
Control mode |
Touch screen control |
|
Test speed |
(0.4±0.03)Hz,(25±2)times/min |
|
Test times |
7000 times, can be set |
|
Impact height |
150mm(6”), adjustable |
|
Impact weight |
3.75kg |
|
Impact wheel center position |
Parallel distance with seam 25±3mm |
|
Elastic foam pad size |
230mmx280mmx180mm |
|
Sample dimension |
190mmx255mm |
|
Power supply |
AC220V, 50/60HZ |
Related Tags :
Martindale Abrasion Tester is suitable for the test of the degree of abrasion and pilling of fabrics. It is also suitable for fabric abrasion resistance test. Martindale Abrasion Tester is widely used in textile testing.
Hydrostatic Head Tester is used to measure the impermeability of various fabrics that have undergone water-repellent treatment
Zipper Fatigue Tester is suitable for testing zipper under the action of horizontal and vertical tension can bear the prescribed number of reciprocating drive operation or not.
ICI Pilling and Snagging Tester is used to determine the surface fuzzes and pilling properties of both woven and knitted materials.
Spray Rating Tester is used to determine the surface wetting resistance of fabrics.
Bursting Strength Tester is suitable for various textiles, non-woven fabrics, leather and other materials, when the force is applied in all directions of warp and weft at the same time (elastic diaphragm method), the performance measurement of expansion force and degree of expansion.
0.01g Balance with durable stainless steel scale, weighing, peeling, counting, unit conversion.
Button Snap Pull Tester is used to test whether the buttons sewn on the clothes can withstand the strength required by the standard.
Tel : 15280858852
Whatsapp : 15280858852
Email : market@avenotester.com
Skype : sales@avenotester.com
Address : 1# Zhongjunshangcheng, Nanhuan Road, Licheng Region, Quanzhou of Fujian China
