The Textile Vertical Flammability Tester is used to test the vertical flammability of various fabrics. This tester can select different bracket accessories according to different test standards.
Brand:
AVENOItem NO.:
AG65Payment:
T/T, L/CProduct Origin:
ChinaShipping Port:
Xiamen portLead Time：
3-7daysApplication
The Textile Vertical Flammability Tester is used to test the vertical flammability of various fabrics. This tester can select different bracket accessories according to different test standards.
Standards
BS 5438, BS EN 532, 533, BS EN 1103, BS EN ISO 6940, 15025, EN ISO 6941, EN71, ISO 10047, DIN 53438, GB/T 5455, GB/T 5456, 8745, GB/T 8746
Dimensions & Weight
|
Model |
AG65 Textile Vertical Flammability Tester |
|
Dimension |
80x55x66cm |
|
Weight |
45Kg |
Key Specification
|
Model |
AG65 Textile Vertical Flammability Tester |
|
Control model |
Touch screen control |
|
Ignition time setting range |
0~99.99s |
|
Combustion timing range |
0~999.9s |
|
Nozzle angle |
Angle to horizontal line 0 °/ 30 °/ 90 °adjustable |
|
Test flame height |
20mm/40mm |
|
U-shaped fixture inner frame |
80mmx600mm |
|
U-shaped fixture marking line |
adjustable |
|
Burning gases |
Butane gas |
|
Power supply |
AC220V, 50/60HZ |
Standard Accessories
|
Model |
AG65 Textile Vertical Flammability Tester |
|
Griper |
1 set |
|
Gas supply device |
1 set |
|
Flame ruler |
1 pc |
|
Cotton thread |
1 roll |
|
Power line |
1 pc |
Martindale Abrasion Tester is suitable for the test of the degree of abrasion and pilling of fabrics. It is also suitable for fabric abrasion resistance test. Martindale Abrasion Tester is widely used in textile testing.
Hydrostatic Head Tester is used to measure the impermeability of various fabrics that have undergone water-repellent treatment.
Zipper Fatigue Tester is suitable for testing zipper under the action of horizontal and vertical tension can bear the prescribed number of reciprocating drive operation or not.
ICI Pilling and Snagging Tester is used to determine the surface fuzzes and pilling properties of both woven and knitted materials.
Spray Rating Tester is used to determine the surface wetting resistance of fabrics.
Bursting Strength Tester is suitable for various textiles, non-woven fabrics, leather and other materials, when the force is applied in all directions of warp and weft at the same time (elastic diaphragm method), the performance measurement of expansion force and degree of expansion.
0.01g Balance with durable stainless steel scale, weighing, peeling, counting, unit conversion.
Button Snap Pull Tester is used to test whether the buttons sewn on the clothes can withstand the strength required by the standard.
Tel : 15280858852
Whatsapp : 15280858852
Email : market@avenotester.com
Address : 1# Zhongjunshangcheng, Nanhuan Road, Licheng Region, Quanzhou of Fujian China
