This Gurley Type Bending Stiffness Tester is mainly used to measure the bending resilience of woven and knitted fabrics, paper, and cardboard. The Gurley Type Bending Stiffness Tester has a simple structure and is easy to operate.
Brand:
AVENOItem NO.:
AG84Payment:
T/T, L/CProduct Origin:
ChinaShipping Port:
Xiamen portLead Time：
3-7daysApplication
This Gurley Type Bending Stiffness Tester is mainly used to measure the bending resilience of woven and knitted fabrics, paper, and cardboard. The Gurley Type Bending Stiffness Tester has a simple structure and is easy to operate.
Standards
TAPPIT543-1994, ASTMD6125-97, IEST-RP-CC021.2(2005
CRAA433, GB/T18318.3-2009
Dimension & Weight
|
Model |
AG84 Gurley Type Bending Stiffness Tester |
|
Dimension |
30*48*46cm |
|
Weight |
8kg |
Key Specification
|
Model |
AG84 Gurley Type Bending Stiffness Tester |
|
Teat range |
1.39mg～56888mg Gurley stiffness unit |
|
Sample length |
25.4mm（1in.），38.1mm（1.5in.），63.5mm（2.5in.），114.3mm（4.5in.） |
|
Sample width |
≤50.8mm（2in.） |
|
Sample clamp position (test length) |
12.7mm，25.4mm，50.8mm，101.6mm |
|
Swing speed |
ω=2r／min |
|
Load weight |
5g, 10g, 25g, 50g, 100g, 200g |
|
Swing angle |
＜±45° |
|
Center distance of weight slot |
rl＝25.4mm，r2＝50.8mm，r3=101.6mm |
|
Power supply |
Ac220V, 50/60HZ |
Martindale Abrasion Tester is suitable for the test of the degree of abrasion and pilling of fabrics. It is also suitable for fabric abrasion resistance test. Martindale Abrasion Tester is widely used in textile testing.
Hydrostatic Head Tester is used to measure the impermeability of various fabrics that have undergone water-repellent treatment.
Zipper Fatigue Tester is suitable for testing zipper under the action of horizontal and vertical tension can bear the prescribed number of reciprocating drive operation or not.
ICI Pilling and Snagging Tester is used to determine the surface fuzzes and pilling properties of both woven and knitted materials.
Spray Rating Tester is used to determine the surface wetting resistance of fabrics.
Bursting Strength Tester is suitable for various textiles, non-woven fabrics, leather and other materials, when the force is applied in all directions of warp and weft at the same time (elastic diaphragm method), the performance measurement of expansion force and degree of expansion.
0.01g Balance with durable stainless steel scale, weighing, peeling, counting, unit conversion.
Button Snap Pull Tester is used to test whether the buttons sewn on the clothes can withstand the strength required by the standard.
Tel : 15280858852
Whatsapp : 15280858852
Email : market@avenotester.com
Address : 1# Zhongjunshangcheng, Nanhuan Road, Licheng Region, Quanzhou of Fujian China
