The Slip Resistance Test Equipment is mainly used to evaluate the shoes slip resistance property and test the friction between the sole, front of the sole and heel of the finished shoes and the ground when walking.
Brand:
AVENOItem NO.:
AF09Payment:
T/T, L/CShipping Port:
Xiamen portLead Time：
3-7daysApplication
The Slip Resistance Test Equipment is mainly used to evaluate the shoes slip resistance property and test the friction between the sole, front of the sole and heel of the finished shoes and the ground when walking.
Standards
EN 13287, SATRA TM144, GB/T 28287, ASTM F2913, ISO 20344, ISO 20345
Dimension & Weight
|
Model |
Slip Resistance Test Equipment |
|
Dimensions |
170*60*115cm |
|
Weight |
300kg |
Key Specification
|
Model |
Slip Resistance Test Equipment |
|
Control mode |
Computer control |
|
Sensor |
Vertical load cell: 100kg*1 |
|
|
Horizontal load cell: 100kg*2 |
|
Standard vertical pressure |
500±25N (for footwear of European size 40, UK size 6.5 and above) 400±20N (for footwear below European size 40, UK size 6.5) |
|
Slip speed range |
100 mm/s～500 mm/s, can be set |
|
Standard slip speed |
300 mm/s±3 mm/s |
|
Wedge Angle gauge |
EN standard 7°, SATRA 5° |
|
Test floor |
Compressed tile floor, stainless steel board, carpet |
|
Power supply |
AC220V, 50/60HZ |
Whole Shoes Flexing Tester is applicable to testing the resistance to repeated flexing of all types of footwear.
Insock Absorption And Desorption Tester is used to test the water absorption and hydrolysis of the insole.
Shoe Stiffness Tester (Shoe Flexing Tester) is used to test the bending resistance of finished shoes
Mechanical Shaker can be used for solution analysis of containers such as test tubes, separatory funnels, flasks, etc.
Sole Adhesion Equipment using the principle of leverage, the sole and upper of the finished shoe are separated by applying a gradually increasing force on the fulcrum part of the finished shoe, and the adhesion between the toe and the upper of the finished shoe is evaluated by the size of the sole and the upper when they are just separated. Strength.
Footwear Water Resistance Test Machine can be used to test the dynamic waterproof performance of various finished boots and shoes.
Rebound Resilience Elasticity Tester is mainly suitable for testing elasticity and impact resistance of foam materials.
The Rubber Aging Oven is used to simulate the natural irradiation environment, and the yellowing resistance of the test sample under natural light irradiation can be evaluated by observing the yellowing degree of the test sample after a certain irradiation distance and time.
Tel : 15280858852
Whatsapp : 15280858852
Email : market@avenotester.com
Address : 1# Zhongjunshangcheng, Nanhuan Road, Licheng Region, Quanzhou of Fujian China
