The horizontal flammability tester is mainly used to determine the horizontal combustion performance of textiles and is widely used in automotive interior materials.
Brand:
AVENOItem NO.:
AG32Payment:
T/T, L/CProduct Origin:
ChinaShipping Port:
Xiamen portLead Time：
3-7daysApplication
The horizontal flammability tester is mainly used to determine the horizontal combustion performance of textiles and is widely used in automotive interior materials.
Standards
ISO 3795, ASTM D5153, JIS D1201, FZ/T 01028, GB 8410, GB/T 20953, FMVSS 302, SAE J369, GMW 3232.
Feature of Martindale Abrasion Tester
1. Test chamber and fixture use SUS304 stainless steel, with toughened glass transparent window, neat and convenient to observe the sample changes during testing.
2. Circulation ventilation system for long-term cooling of the instrument to ensure stable internal environment.
3. Automatic timing, when burning reach mark line, automatic stop time recording by sensor, exclude errors caused by human observation.
4. Ignition device with position induction, automatic sensing sample position then start the test.
Dimension & Weight
|
Model |
AG32 Horizontal Flammability Tester |
|
Dimension |
57*26*37cm |
|
Weight |
28kg |
Key Specification
|
Model |
AG32 Horizontal Flammability Tester |
|
Test chamber dimension |
381*203*356mm (with 10 bottom vent, φ19mm) |
|
Sample fixture |
U sharp, inner size 330*50mm |
|
Sample size |
356*100mm, thickness ≤13mm |
|
Ignition height |
19mm |
|
Nozzle internal diameter |
9.5mm |
|
Nozzle angle |
Vertical |
|
Flame height |
38mm |
|
Marking line distance |
254mm |
|
Power supply |
AC220V, 50/60HZ |
Standard Accessories
|
Model |
AG32 Horizontal Flammability Tester |
|
Sample holder |
1pc |
|
Metal comb |
1pc |
|
Gas feed device |
1set |
|
Power line |
1pc |
Martindale Abrasion Tester is suitable for the test of the degree of abrasion and pilling of fabrics. It is also suitable for fabric abrasion resistance test. Martindale Abrasion Tester is widely used in textile testing.
Hydrostatic Head Tester is used to measure the impermeability of various fabrics that have undergone water-repellent treatment.
Zipper Fatigue Tester is suitable for testing zipper under the action of horizontal and vertical tension can bear the prescribed number of reciprocating drive operation or not.
ICI Pilling and Snagging Tester is used to determine the surface fuzzes and pilling properties of both woven and knitted materials.
Spray Rating Tester is used to determine the surface wetting resistance of fabrics.
Bursting Strength Tester is suitable for various textiles, non-woven fabrics, leather and other materials, when the force is applied in all directions of warp and weft at the same time (elastic diaphragm method), the performance measurement of expansion force and degree of expansion.
0.01g Balance with durable stainless steel scale, weighing, peeling, counting, unit conversion.
Button Snap Pull Tester is used to test whether the buttons sewn on the clothes can withstand the strength required by the standard.
Tel : 15280858852
Whatsapp : 15280858852
Email : market@avenotester.com
Skype : sales@avenotester.com
Address : 1# Zhongjunshangcheng, Nanhuan Road, Licheng Region, Quanzhou of Fujian China
