The Sweating Guarded Hotplate Tester is used to test the thermal and moisture resistance properties of fabrics and other materials under normal conditions.
Brand:
AVENOItem NO.:
AG48Payment:
T/T, L/CProduct Origin:
ChinaShipping Port:
Xiamen portLead Time：
3-7daysApplication
The Sweating Guarded Hotplate Tester is used to test the thermal and moisture resistance properties of fabrics and other materials under normal conditions. The test simulates the transmission of heat and humidity in contact with human skin. It is suitable for thermal and moisture resistance testing of flat materials such as medical products, textiles, clothing, bedding, sleeping bags, interior decorations, films, coating materials, foam, leather, and textiles combined with multilayer fabrics.
Standards
GB/T11048, ISO11092, ASTMF1868-09, BS8515, ASTMD1518-2014, JIS L1096-2010, ASTM F 1868-02
Dimension & Weight
|
Model |
AG48 Sweating Guarded Hotplate Tester |
|
Dimensions |
120×90×180cm |
|
Weight |
350kg |
Key Specification
|
Model |
AG48 Sweating Guarded Hotplate Tester |
|
Thermal resistance (RCT) range |
0.002~2.0 m².K/W |
|
Wet resistance (RET) range |
0~1000 m2. Pa /W |
|
Test board temperature range |
30℃~40℃, adjust |
|
Temperature precision |
±0.03℃ |
|
Wind speed |
0-1.2m/s, continuous adjustable |
|
Wind speed precision |
±1% |
|
Test sample thickness |
0-50mm |
|
Test plate area |
254mm×254mm |
|
Sample area |
512mm×512mm |
|
Thermal ring width |
127mm |
|
Power supply |
AC220V, 50/60HZ |
Martindale Abrasion Tester is suitable for the test of the degree of abrasion and pilling of fabrics. It is also suitable for fabric abrasion resistance test. Martindale Abrasion Tester is widely used in textile testing.
Hydrostatic Head Tester is used to measure the impermeability of various fabrics that have undergone water-repellent treatment.
Zipper Fatigue Tester is suitable for testing zipper under the action of horizontal and vertical tension can bear the prescribed number of reciprocating drive operation or not.
ICI Pilling and Snagging Tester is used to determine the surface fuzzes and pilling properties of both woven and knitted materials.
Spray Rating Tester is used to determine the surface wetting resistance of fabrics.
Bursting Strength Tester is suitable for various textiles, non-woven fabrics, leather and other materials, when the force is applied in all directions of warp and weft at the same time (elastic diaphragm method), the performance measurement of expansion force and degree of expansion.
0.01g Balance with durable stainless steel scale, weighing, peeling, counting, unit conversion.
Button Snap Pull Tester is used to test whether the buttons sewn on the clothes can withstand the strength required by the standard.
Tel : 15280858852
Whatsapp : 15280858852
Email : market@avenotester.com
Skype : sales@avenotester.com
Address : 1# Zhongjunshangcheng, Nanhuan Road, Licheng Region, Quanzhou of Fujian China
